Stamping Parts

2019年7月11日 (木)

China Hardware Sanitary Suppliers have a non-porous surface layer

1. Resilient Floors, especially VCT (vinyl composition tile) flooring is used
commercially on high traffic floors such as retail or grocery stores. VCT tile
is durable and holds up to heavy traffic. However there is a lot of maintenance
involved in keeping these floors looking good. They should have a sealer or
finish applied to them, which gives the floor a high-gloss look. The floor also
needs to be swept and mopped with a neutral pH cleaner on a regular maintenance
schedule to keep the floor looking shiny and clean. The floors may also need
interim maintenance with slow speed or high speed floor machines and occasional
stripping and re-coating of floor finish.

2. Stone products include marble, granite, and limestone. There has been a
dramatic increase in the use of stone flooring in the past 10 years, even though
it is some of the most costly flooring available. You must be very careful when
caring for stone floors because you could easily damage the surface permanently
if using the wrong chemicals. Use of entry mats and daily sweeping and mopping
is key to keeping stone flooring looking like good. Mop the floor with a neutral
pH floor cleaner or a stone soap, and never flood mop stone flooring. Never use
alkaline or acid cleaners for daily maintenance, as this can damage the floor
over time.

3. Masonry products include ceramic tile, clay tile, and concrete. Ceramic
and clay tiles come in a variety of styles and textures, so this may determine
the type of maintenance needed. Ceramic tile will either be glazed or unglazed.
Glazed tile are shiny and China Hardware
Sanitary Suppliers
have a non-porous surface layer and are more stain and
moisture resistant, whereas unglazed ceramic tile is more slip resistant.
Concrete flooring is now more fashionable with the use of color additives and
texture. Concrete floors can be sealed and finished like a VCT tile floor, and
will require similar daily maintenance using a neutral pH floor cleaner. Daily
maintenance of ceramic tile floors include sweeping and mopping with a neutral
pH cleaner. Do not use acid or alkaline cleaners for daily maintenance as it can
damage the tile and grout over time. Grout may need periodic cleaning with the
use of a slow speed floor machine and a nylo grit brush, which can get into the
grout lines where soil accumulates.

4. Wood Floors are being widely used in residential homes. To keep the floor
looking good, protection from abuse, stains, soil and moisture is very
important. Basic maintenance of wood floors is similar to other floors, however
wood is very sensitive to water, and scratches much more easily than other types
of flooring. Extreme care must be used, so avoid dragging anything across a wood
floor, and never use excessive water when Garden
Tap
cleaning. It's best to use a well wrung out mop or microfiber flat mop,
which uses less water than conventional mops. Use a commercial wood cleaner, but
avoid using oil-based soaps or furniture polish on wood floors, as they can make
the floor slippery and leave a residue.

5. Laminate Floors are also being widely used in residential homes. Laminate
floors are made of a combination of wood and cellulose products (mostly wood).
Melamine (clear resin) is applied to the surface to make a strong outer layer.
Manufacturers say that little or no maintenance is needed on laminate floors.
They recommend regular sweeping and damp mopping using a laminate floor cleaner.
As with wood floors, laminate floors are sensitive to moisture, so never use
excessive water when cleaning.

その他のカテゴリー